location:Home / NEWS / How to Unload the Elastic Retaining Ring for Holes
Add a shaft shoulder in front of the bearing end cover such as the retaining ring to support the outer ring of the bearing, and adjust the gap with a gasket.
(Retaining ring bearing end preceded by a shaft shoulder top on the bearing outer ring gap with shim adjustment.)
Popular products
News recommendations
Selection and daily maintenance of retaining rings2023-03-30
Selection guide for retaining rings: Because retaining rings are generally made of spring steel 65Mn, their comprehensive mechanical properties are be…
Design and Application of Open Retaining Ring2023-03-30
In fact, everyone has some understanding of the retaining ring, but you may not have touched on the open retaining ring. As the name suggests, the ini…
Introduction and types of corrugated washers2023-03-21
Wave Spring Washers, also known as Wave Spring Washers. Waveform springs mainly consist of single-layer and multi-layer waveform springs, among which …
The difference between corrugated washers and ordinary washers2023-03-21
Wave washer is a type of spring washer, which is different from flat washer, so we should pay attention to distinguishing between wave washer and flat…
All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.
Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone
National Service Hotline
13968888163
We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts